mirror of https://github.com/LeOS-GSI/LeOS-Genesis
182 lines
6.2 KiB
Plaintext
182 lines
6.2 KiB
Plaintext
SNMPv1 agent for lwIP
|
|
|
|
Author: Christiaan Simons
|
|
|
|
This is a brief introduction how to use and configure the SNMP agent.
|
|
Note the agent uses the raw-API UDP interface so you may also want to
|
|
read rawapi.txt to gain a better understanding of the SNMP message handling.
|
|
|
|
0 Agent Capabilities
|
|
====================
|
|
|
|
SNMPv1 per RFC1157
|
|
This is an old(er) standard but is still widely supported.
|
|
For SNMPv2c and v3 have a greater complexity and need many
|
|
more lines of code. IMHO this breaks the idea of "lightweight IP".
|
|
|
|
Note the S in SNMP stands for "Simple". Note that "Simple" is
|
|
relative. SNMP is simple compared to the complex ISO network
|
|
management protocols CMIP (Common Management Information Protocol)
|
|
and CMOT (CMip Over Tcp).
|
|
|
|
MIB II per RFC1213
|
|
The standard lwIP stack management information base.
|
|
This is a required MIB, so this is always enabled.
|
|
When builing lwIP without TCP, the mib-2.tcp group is omitted.
|
|
The groups EGP, CMOT and transmission are disabled by default.
|
|
|
|
Most mib-2 objects are not writable except:
|
|
sysName, sysLocation, sysContact, snmpEnableAuthenTraps.
|
|
Writing to or changing the ARP and IP address and route
|
|
tables is not possible.
|
|
|
|
Note lwIP has a very limited notion of IP routing. It currently
|
|
doen't have a route table and doesn't have a notion of the U,G,H flags.
|
|
Instead lwIP uses the interface list with only one default interface
|
|
acting as a single gateway interface (G) for the default route.
|
|
|
|
The agent returns a "virtual table" with the default route 0.0.0.0
|
|
for the default interface and network routes (no H) for each
|
|
network interface in the netif_list.
|
|
All routes are considered to be up (U).
|
|
|
|
Loading additional MIBs
|
|
MIBs can only be added in compile-time, not in run-time.
|
|
There is no MIB compiler thus additional MIBs must be hand coded.
|
|
|
|
Large SNMP message support
|
|
The packet decoding and encoding routines are designed
|
|
to use pbuf-chains. Larger payloads than the minimum
|
|
SNMP requirement of 484 octets are supported if the
|
|
PBUF_POOL_SIZE and IP_REASS_BUFSIZE are set to match your
|
|
local requirement.
|
|
|
|
1 Building the Agent
|
|
====================
|
|
|
|
First of all you'll need to add the following define
|
|
to your local lwipopts.h:
|
|
|
|
#define LWIP_SNMP 1
|
|
|
|
and add the source files in lwip/src/core/snmp
|
|
and some snmp headers in lwip/src/include/lwip to your makefile.
|
|
|
|
Note you'll might need to adapt you network driver to update
|
|
the mib2 variables for your interface.
|
|
|
|
2 Running the Agent
|
|
===================
|
|
|
|
The following function calls must be made in your program to
|
|
actually get the SNMP agent running.
|
|
|
|
Before starting the agent you should supply pointers
|
|
to non-volatile memory for sysContact, sysLocation,
|
|
and snmpEnableAuthenTraps. You can do this by calling
|
|
|
|
snmp_set_syscontact()
|
|
snmp_set_syslocation()
|
|
snmp_set_snmpenableauthentraps()
|
|
|
|
Additionally you may want to set
|
|
|
|
snmp_set_sysdescr()
|
|
snmp_set_sysobjid() (if you have a private MIB)
|
|
snmp_set_sysname()
|
|
|
|
Also before starting the agent you need to setup
|
|
one or more trap destinations using these calls:
|
|
|
|
snmp_trap_dst_enable();
|
|
snmp_trap_dst_ip_set();
|
|
|
|
In the lwIP initialisation sequence call snmp_init() just after
|
|
the call to udp_init().
|
|
|
|
Exactly every 10 msec the SNMP uptime timestamp must be updated with
|
|
snmp_inc_sysuptime(). You should call this from a timer interrupt
|
|
or a timer signal handler depending on your runtime environment.
|
|
|
|
An alternative way to update the SNMP uptime timestamp is to do a call like
|
|
snmp_add_sysuptime(100) each 1000ms (which is bigger "step", but call to
|
|
a lower frequency). Another one is to not call snmp_inc_sysuptime() or
|
|
snmp_add_sysuptime(), and to define the SNMP_GET_SYSUPTIME(sysuptime) macro.
|
|
This one is undefined by default in mib2.c. SNMP_GET_SYSUPTIME is called inside
|
|
snmp_get_sysuptime(u32_t *value), and enable to change "sysuptime" value only
|
|
when it's queried (any function which need "sysuptime" have to call
|
|
snmp_get_sysuptime).
|
|
|
|
|
|
3 Private MIBs
|
|
==============
|
|
|
|
If want to extend the agent with your own private MIB you'll need to
|
|
add the following define to your local lwipopts.h:
|
|
|
|
#define SNMP_PRIVATE_MIB 1
|
|
|
|
You must provide the private_mib.h and associated files yourself.
|
|
Note we don't have a "MIB compiler" that generates C source from a MIB,
|
|
so you're required to do some serious coding if you enable this!
|
|
|
|
Note the lwIP enterprise ID (26381) is assigned to the lwIP project,
|
|
ALL OBJECT IDENTIFIERS LIVING UNDER THIS ID ARE ASSIGNED BY THE lwIP
|
|
MAINTAINERS!
|
|
|
|
If you need to create your own private MIB you'll need
|
|
to apply for your own enterprise ID with IANA: http://www.iana.org/numbers.html
|
|
|
|
You can set it by passing a struct snmp_obj_id to the agent
|
|
using snmp_set_sysobjid(&my_object_id), just before snmp_init().
|
|
|
|
Note the object identifiers for thes MIB-2 and your private MIB
|
|
tree must be kept in sorted ascending (lexicographical) order.
|
|
This to ensure correct getnext operation.
|
|
|
|
An example for a private MIB is part of the "minimal Unix" project:
|
|
contrib/ports/unix/proj/minimal/lwip_prvmib.c
|
|
|
|
The next chapter gives a more detailed description of the
|
|
MIB-2 tree and the optional private MIB.
|
|
|
|
4 The Gory Details
|
|
==================
|
|
|
|
4.0 Object identifiers and the MIB tree.
|
|
|
|
We have three distinct parts for all object identifiers:
|
|
|
|
The prefix
|
|
.iso.org.dod.internet
|
|
|
|
the middle part
|
|
.mgmt.mib-2.ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
|
|
|
|
and the index part
|
|
.1.192.168.0.1
|
|
|
|
Objects located above the .internet hierarchy aren't supported.
|
|
Currently only the .mgmt sub-tree is available and
|
|
when the SNMP_PRIVATE_MIB is enabled the .private tree
|
|
becomes available too.
|
|
|
|
Object identifiers from incoming requests are checked
|
|
for a matching prefix, middle part and index part
|
|
or are expanded(*) for GetNext requests with short
|
|
or inexisting names in the request.
|
|
(* we call this "expansion" but this also
|
|
resembles the "auto-completion" operation)
|
|
|
|
The middle part is usually located in ROM (const)
|
|
to preserve precious RAM on small microcontrollers.
|
|
However RAM location is possible for a dynamically
|
|
changing private tree.
|
|
|
|
The index part is handled by functions which in
|
|
turn use dynamically allocated index trees from RAM.
|
|
These trees are updated by e.g. the etharp code
|
|
when new entries are made or removed form the ARP cache.
|
|
|
|
/** @todo more gory details */
|